Camloc® fasteners,offer the quickest operating high re-use,mechanical fastening system available. They securely lock and disengage with a simple 90° action. A standard Camloc fastener system consists of a stud and mating receptacle, the panel and frame, along with a method of retaining the stud. Stud retention might be a grommet or retaining ring,or possibly both. Some Camloc series include snap-in type studs, which do not require the use of a retaining ring, and some studs do not require retaining rings or receptacles. Camloc Receptacle types are included with each stud series. Most attach by use of rivets to the underside of the frame. Some simply snap into place from the front or rear of the frame and others are ultrasonically installed. Camloc Fastener selection consists of finding the desired stud based on strength requirements, head style, installation method and operational characteristics. A Camloc receptacle is then chosen with the selection, varying based upon the stud selected. When calculating the total material thickness, it is important to consider any paint, finishes or compressed gaskets that may be present in the joint.
The Frekote 770-NC synthetic mold release I ordered has a 6-month shelf life from the factory. The can I received on 8/25 was set to expire on 8/31 according to the date printed on the bottom of the can. I called and sent a photo of the can bottom and they said it should have been taken off the shelf a month earlier, so they will send me a good can when new stock arrives without sending the out of date can back.
I appreciate the fast delivery and them taking care of the issue, but it means you could be buying product that has only one month of shelf life remaining. Call before you buy and have them confirm the expiration date of their stock and if it is less than works for you, work out delivery from fresh stock or negotiate a discount.
