Double/Bubble® - Red Extra Fast Set Epoxy | 04001

Hardman's Double Bubble® Red Extra Fast Setting Epoxy

The extra fast setting for quick repairs. Excellent adhesive for bonding wood, glass, metal, stone, concrete, ceramics, and leather. Each packet will shaft at least 3 clubs, the same epoxy as the G-1100 Series for golf clubs.

• Typical uses: Repairing tools, auto parts, electrical and electronic components, furniture, and other applications that require a fast-setting adhesive.
• Work time: 3 minutes
• Handling strength: 15-30 minutes
• Color: Light amber (translucent)
• Viscosity: Syrup
• Part Number: 04001

NSN: 8040-00-092-2816 

HARDMAN Fast-Setting Epoxy is an extra fast, two-component, room-temperature curing epoxy adhesive. The system will cure as low as –18 °C (0 °F). It has a convenient mix ratio, excellent cohesive strength, and bonds to most substrates, including metal, wood, concrete, ceramics, and many plastics. It is recommended for fast patching, fixturing, and other repairs requiring quick handling strength.

HARDMAN Fast-Setting Epoxy is an excellent, general-purpose adhesive. It is recommended for the following substrates:

The DOUBLE/BUBBLE package is a handy, dual-pouch, one-shot, job-size packaging concept. It reduces the waste typically associated with using larger quantities of two-component adhesives. This unique packaging ensures that DOUBLE/BUBBLE adhesives are always factory fresh and accurately portioned for optimum adhesive performance.

Directions for Use

The surface must be clean and dry before application. Remove all chemicals, dirt, wax, and oil.

Fold the DOUBLE/BUBBLE package along the center seal, snip the end, squeeze out the contents, mix thoroughly, and apply. 

STORAGE AND HANDLING

Store DOUBLE/BUBBLE adhesives at room temperature in a dry environment. Extreme low temperatures may cause crystallization. Extreme high temperatures may degrade the properties. Various cleaning solutions are available for cured and uncured epoxies and polyurethanes.

SAFETY

These materials are intended for commercial and industrial use only, and good housekeeping, safety, and cleanliness should be followed before, during, and after use. Although the system contains low-volatility materials, care should be taken in handling. Use adequate ventilation in the work area. These materials may cause dermatitis in susceptible individuals. Keep off the skin and out of the eyes. In case of accidental skin contact, wash thoroughly with soap and water. In case of eye contact, flush your eyes thoroughly with water and consult a physician immediately.